Time-division multiplexing for cable reduction in ultrasound imaging catheters

In ultrasound imaging catheter applications, gathering the data from multi-element transducer arrays is difficult as there is a restriction on cable count due to the diameter of the catheter. In such applications, CMUT-on-CMOS technology allows for 2D arrays with many elements to be designed and bonded directly onto CMOS circuitry. This allows for complex electronics to be placed at the tip of the catheter which leads to the possibility to include electronic multiplexing techniques to greatly reduce the cable count required for a large element array. Current approaches to cable reduction tend to rely on area and power hungry circuits to function, making them unsuitable for use in catheters. Furthermore the length requirement for catheters and lack of power available to on-chip cable drivers leads to limited signal strength at the receiver end. In this paper an alternative approach using Analogue Time Division Multiplexing (TDM) is presented, which addresses the cable restrictions of the catheter and, using a novel digital demultiplexing technique, allows for a reduction in the number of analogue signal processing stages required

Direct Digital Demultiplexing of Analog TDM Signals for Cable Reduction in Ultrasound Imaging Catheters.

In real-time catheter based 3D ultrasound imaging applications, gathering data from the transducer arrays is difficult as there is a restriction on cable count due to the diameter of the catheter. Although area and power hungry multiplexing circuits integrated at the catheter tip are used in some applications, these are unsuitable for use in small sized catheters for applications like intracardiac imaging. Furthermore, the length requirement for catheters and limited power available to on-chip cable drivers leads to limited signal strength at the receiver end. In this paper an alternative approach using Analog Time Division Multiplexing (TDM) is presented which addresses the cable restrictions of ultrasound catheters. A novel digital demultiplexing technique is also described which allows for a reduction in the number of analog signal processing stages required. The TDM and digital demultiplexing schemes are demonstrated for an intracardiac imaging system that would operate in the 4 MHz to 11 MHz range. A TDM integrated circuit (IC) with 8:1 multiplexer is interfaced with a fast ADC through a micro-coaxial catheter cable bundle, and processed with an FPGA RTL simulation. Input signals to the TDM IC are recovered with -40 dB crosstalk between channels on the same micro-coax, showing the feasibility of this system for ultrasound imaging applications

Front-end electronics for cable reduction in Intracardiac Echocardiography (ICE) catheters

3-D imaging ICE catheters with large element counts present design challenges in achieving simultaneous data readout from all elements while significantly reducing cable count for a small catheter diameter. Current approaches such as microbeamformer techniques tend to rely on area and power hungry circuits, making them undesirable for ICE catheters. In this paper, a system which uses are an efficient real-time programmable on-chip transmit (TX) beamformer circuitry to reduce the cable count on the TX side and analog 8/1 Time Division Multiplexing (TDM) with Direct Digital Demodulation (DDD) to reduce the cable count on the receive (RX) side is presented

Single-Chip Reduced-Wire CMUT-on-CMOS System for Intracardiac Echocardiography

CMUT-on-CMOS integration is particularly suitable for catheter based ultrasound imaging applications, where electronics integration enables multiplexing capabilities to reduce the number of electrical connections leading to smaller catheter cable profiles. Here, a single-chip CMUT-on-CMOS system for intracardiac echocardiography (ICE) is presented. In this system, a 64 element 1-D CMUT array is fabricated over an application specific integrated circuit (ASIC) that features a programmable transmit beamformer with high voltage (HV) pulsers and receive circuits using 8:1 time division multiplexing (TDM). Integration of pitch matched 64 channel front-end circuits with CMUT arrays in a single-chip configuration allows for implementation of catheter probes with miniaturization, reduced number of cables, and better mechanical flexibility. The ASIC is implemented in 60 V 0.18 μm HV process. It occupies 2.6×11 mm 2 which can fit in the catheter size of 9F, and reduces the number of wires from more than 64 to 22. This system is used for B-mode imaging of imaging phantoms and its potential application for 2D CMUT-on-CMOS arrays is discussed

Single-Chip Reduced-Wire Active Catheter System with Programmable Transmit Beamforming and Receive Time-Division Multiplexing for Intracardiac Echocardiography

Intracardiac echocardiography (ICE) provides real-time ultrasound imaging of the heart anatomy from inside, guiding interventions like valve repair, closure of atrial septal defects (ASD) and catheter-based ablation to treat atrial fibrillation. With its better image quality and ease of use, ICE is becoming the preferred imaging modality over transesophageal echography (TEE) for structural heart interventions. The existing commercial ICE catheters, however, offer a limited 2-D or 3-D field of view despite catheters utilizing large number of wires. In these catheters, each element in the ICE array is connected to the backend data-acquisition channel with a separate wire, which is a critical barrier for improving image quality and widening the field of view. In order to use ICE catheters under MRI instead of the ionizing X-ray radiation-based angiography, the number of interconnect wires in the catheter should be minimized to reduce RF-induced heating. Furthermore, reducing the number of wires improves the flexibility and lowers the cost of the single-use ICE catheters

Kinetics of Biodiesel Production from Microalgae Using Microbubble Interfacial Technology

As an alternative to fossil fuels, biodiesel can be a source of clean and environmentally friendly energy source. However, its commercial application is limited by expensive feedstock and the slow nature of the pretreatment step-acid catalysis. The conventional approach to carry out this reaction uses stirred tank reactors. Recently, the lab-scale experiments using microbubble mediated mass transfer technology have demonstrated its potential use at commercial scale. However, all the studies conducted so far have been at a lab scale~100 mL of feedstock. To analyze the feasibility of microbubble technology, a larger pilot scale study is required. In this context, a kinetic study of microbubble technology at an intermediate scale is conducted (3 L of oil). Owing to the target for industrial application of the process, a commercial feedstock (Spirulina), microalgae oil (MO) and a commercial catalyst para-toluene sulfonic acid (PTSA) are used. Experiments to characterize the kinetics space (response surface, RSM) required for up-scaling are designed to develop a robust model. The model is compared with that developed by the gated recurrent unit (GRU) method. The maximum biodiesel conversion of 99.45 ± 1.3% is achieved by using these conditions: the molar ratio of MO to MeOH of 1:23.73 ratio, time of 60 min, and a catalyst loading of 3.3 wt% MO with an MO volume of 3 L. Furthermore, predicted models of RSM and GRU show proper fits to the experimental result. It was found that GRU produced a more accurate and robust model with correlation coefficient R2 = 0.9999 and root-mean-squared error (RSME) = 0.0515 in comparison with RSM model with R2 = 0.9844 and RMSE = 3.0832, respectively. Although RSM and GRU are fully empirical representations, they can be used for reactor up-scaling horizontally with microbubbles if the liquid layer height is held constant while the microbubble injection replicates along the floor of the reactor vessel—maintaining the tessellation pattern of the smaller vessel. This scaling approach maintains the local mixing profile, which is the major uncontrolled variable in conventional stirred tank reactor up-scaling

Access to Artemisinin-Based Anti-Malarial Treatment and its Related Factors in Rural Tanzania.

Artemisinin-based combination treatment (ACT) has been widely adopted as one of the main malaria control strategies. However, its promise to save thousands of lives in sub-Saharan Africa depends on how effective the use of ACT is within the routine health system. The INESS platform evaluated effective coverage of ACT in several African countries. Timely access within 24 hours to an authorized ACT outlet is one of the determinants of effective coverage and was assessed for artemether-lumefantrine (Alu), in two district health systems in rural Tanzania. From October 2009 to June 2011we conducted continuous rolling household surveys in the Kilombero-Ulanga and the Rufiji Health and Demographic Surveillance Sites (HDSS). Surveys were linked to the routine HDSS update rounds. Members of randomly pre-selected households that had experienced a fever episode in the previous two weeks were eligible for a structured interview. Data on individual treatment seeking, access to treatment, timing, source of treatment and household costs per episode were collected. Data are presented on timely access from a total of 2,112 interviews in relation to demographics, seasonality, and socio economic status. In Kilombero-Ulanga, 41.8% (CI: 36.6-45.1) and in Rufiji 36.8% (33.7-40.1) of fever cases had access to an authorized ACT provider within 24 hours of fever onset. In neither of the HDSS site was age, sex, socio-economic status or seasonality of malaria found to be significantly correlated with timely access. Timely access to authorized ACT providers is below 50% despite interventions intended to improve access such as social marketing and accreditation of private dispensing outlets. To improve prompt diagnosis and treatment, access remains a major bottle neck and new more innovative interventions are needed to raise effective coverage of malaria treatment in Tanzania

A Field Training Guide for Human Subjects Research Ethics

Maria Merritt and colleagues report on a Field Training Guide for Human Subjects Research Ethics that they have developed to help train field workers in ethics for research

Assessment of a fragment of e-cadherin as a serum biomarker with predictive value for prostate cancer

In prostate cancer, biomarkers may provide additional value above standard clinical and pathology parameters to predict outcome after specific therapy. The purpose of this study is to evaluate an 80 kDa fragment of the cell adhesion molecule e-cadherin as a serum biomarker. A broad spectrum of prostate cancer serum samples, representing different stages of prostate cancer disease, including benign prostatic hyperplasia (BPH), localised (Loc PCA) and metastatic prostate cancer (Met PCA), was examined for the cleaved product. There is a significant difference in the expression level of the 80 kDa fragment in the serum of healthy individuals vs patients with BPH and between BPH vs Loc PCA and Met PCA (P<0.001). Highest expression levels are observed in advanced metastatic disease. In the cohort of Loc PCA cases, there was no association between the 80 kDa serum concentration and clinical parameters. Interestingly, patients with an 80 kDa level of >7.9 μg l−1 at the time of diagnosis have a 55-fold higher risk of biochemical failure after surgery compared to those with lower levels. This is the first report of the application of an 80 kDa fragment of e-cadherin as a serum biomarker in a broad spectrum of prostate cancer cases. At an optimised cutoff, high expression at the time of diagnosis is associated with a significantly increased risk of biochemical failure, potentially supporting its use for a tailored follow-up protocol for those patients

Stratigraphic correlation and paleoenvironmental analysis of the hydrocarbon-bearing Early Miocene Euphrates and Jeribe formations in the Zagros folded-thrust belt

The Lower Miocene Euphrates and Jeribe formations are considered as the main targets of the Tertiary petroleum system in the western part of the Zagros Basin. The formations consist of carbonates with some evaporate intercalations of the Dhiban Formation. This study utilized data from a field investigation including newly described outcrop sections and newly discovered productive oil fields within the Kirkuk embayment zone of the Zagros fold and thrust belt such as Sarqala and Kurdamir wells. This work is the first to show a stratigraphic correlation and paleoenvironmental interpretation by investigating both well data and new outcrop data. Three depositional environments were identified, (1) an inner and outer ramp belts environment, (2) shoal environment, and (3) restricted lagoon environment. Within these 3 environments, 12 microfacies were identified, based on the distribution of fauna mainly benthonic foraminifera, rock textures, and sedimentary structures. The inferred shallow water depths and variable salinities in both the Euphrates Formation and Jeribe Formation carbonates are consistent with deposition on the inner ramp (restricted lagoon and shoal) environments. Those found in the Euphrates Formation constrained the depositional environment to the restricted lagoon and shoal environment, while the microfacies in the Jeribe Formation provided evidence for an inner ramp and middle to outer ramp belt environments. This study represents the first detailed research that focuses on the stratigraphic correlation and changes in carbonate facies with the main aim to provide a wider understanding of stratigraphy of these carbonate reservoirs throughout the northern part of Iraq